HTLP80-17X100/1,4-1,3RE 3LPE, HSS غلاف حراري ثلاث طبقات

غلاف حراري 1,4-1,3RE من ثلاث طبقات لحماية مناطق تلحيم انابيب النفط و الغاز و الماء ، يتحمل حرارة تصل الى 85 درجة مئوية و يفيد في المناطق الوعرة

Components

First Layer: Solvent free two layers of Liquid Epoxy

Second Layer: High shear resistant copolymer adhesive

Third Layer: Radiation cross-linked, high density polyethylene with PCI - Permanent Change Indicator which flattenes permanently when the rough back is heated.

Ordering Information

Roll form: Must be cut to the desired length according file “AT-GIRTHWELD” in download section. Closure patch size and quantity must be chosen from same file and ordered separately.

HTLP80-20x100/B-RL

• HTLP80 Product name.
• 17” Nominal roll width,
• 100 feet Roll length.30.48 m
• 1,4-1,3 coating’ thickness 2.7 before – 2.4 mm after
• Reduced Edge The sleeve have 8 cm of thinner edges on both sides

/UNI Sleeve: Ready to use sleeve, pre-cut according to pipe diameter and closure patch attached.

HTLP80-16000X17/B(/UNI)

• HTLP80 Product name.
• 16000 Pipe outside diameter, mil (thousand of an inch)
• 17 Sleeve width, inches
• Thickness 2.7 before – 2.4 mm after
• (/UNI) Ready to use sleeve.

Closure Patches

• WPCP-IV-4X17
  • WPCP-IV Name of closure patch.
  • 4 Width, inches
  • 17” length,

For more details please consult to Samm’s Corrosion Engineers.

Applications:

• Girthweld Joints of Water,Oil and Gas Pipelines with Operating temperature up to 85° C (185° F)
• Compatible with all commonly used pipe coatings, including, PE,Coal tar Enamel,Coal Tar Epoxy,

Features & Benefits