Isopad Customised Heating

Heated hose, standard range for liquid and gaseous media IHH-ST1A/ST1D

Isopad IHH-ST1A/ST1D is a flexible heated hose for liquid and gaseous media with a maximum operating temperature of 100°C. The standard versions have smooth PTFE inner hose constructions with stainless steel braiding for pressurized operation. Provided with thermal insulation consists of polyester fleece and ethylene propylene diene monomer, Mechanical protection is provided by a polyamide braid and soft EPDM endcaps. Built-in Pt100 sensors provide optimum temperature control,evenly wrapped resistance heating cable allows an homogeneous heat distribution throughout the hose. 

Isopad IP-DASI silicone heating mats

for industrial use are selected where excellent flexibility and high temperature resistance in thermal processes are required.The processed silicones have good resistance to ozone, oxygen, weathering, ageing effects, bacterial and fungal attacks. They are also highly resistant to various chemicals such as alcohol, acetylene, mineral oil, acids, glucose, and glues. maximum panel temperature of 200°C, so no temperature sensor or controller is necessary.

• Used to provide medium flow and process temperature in ordinary environments.
• The special design including a high powered resistance heating cable embedded in a solid metal housing ensures the maximum on power output at operating conditions.
• These heating units can be used for higher temperatures and faster heat up times.
• These heaters are designed for standard drum sizes of 200L. 

These types of Isopad drum and base drum heaters are used to provide medium flow and process temperature in ordinary environments.

The special design including a high powered resistance heating cable embedded in a solid metal housing ensures the maximum on power output at operating conditions. These heating units can be used for higher temperatures and faster heat up times.

These heaters are designed for standard drum sizes of 200L. 

In our jacket heaters there are three components:

a heater, the insulation for that heater, and the carrier for that assembly. The outer carriers on these versions may be washable. Different shapes are manufactured to customer requirements and many attachment and fixing methods are available. A small number of jacket versions are available with hazardous area approval.

Isopad IHH-ST4A/ST4D

FIGB-SR Hazardous area gas bottle heaters Isopad

Isopad IP-SM silicone heating mats

for industrial use are selected where excellent flexibility and high temperature resistance in thermal processes are needed. this product is typically same of IP-DASI but with the option of Panels customized to your specification are designed with various options on insulated and metal backings, fixings, cutouts, and controllers. We will advise on the best options for your needs, and as each is different we supply a new technical specification.

These types of Isopad drum and base drum heaters are used to provide medium flow and process temperature in ordinary environments.

The special design including a high powered resistance heating cable embedded in a solid metal housing ensures the maximum on power output at operating conditions. These heating units can be used for higher temperatures and faster heat up times.

These heaters are designed for standard drum sizes of 200L. 

Isopad radient heaters (IRH) have been designed as a reliable non-contact electric heat source providing temperatures up-to 1000°C.

The uniform heat density makes them ideal for PECVD vacuum coating processes and they have been widely adopted in high quality applications such as thin film solar panel manufacture.

IDR-LID Isolierter Deckel for IDR Drum Heater

These Isopad drum and base drum heaters are used to provide medium flow and process temperature in hazardous environments.

The special design including a self-regulating heating cable embedded in a solid metal housing ensures the maximum in safety at operating conditions. Using this design an additional temperature limiter is not necessary. 

Isopad platen heaters (IPH)

have been designed to blend the benefits of an electric radiant heat source and the design requirements of press plates. Due to a uniform heat density they are ideally suited to coating and lamination processes and have been widely adopted in high quality applications such as solar panel manufacture.
With many features like mineral insulated, laser welding technology, multiple temperature sensors with the option of fully integrated and vacuum tested power and sensor feedthroughs. 

Isopad IHH-ST2A/ST2D

is a flexible heated hose for liquid and gaseous media with a maximum operating temperature of 200°C. The standard versions have smooth PTFE inner hose constructions with stainless steel braiding for pressurized operation.
The thermal insulation consists of meta-aramide fleece and silicone foam.Mechanical protection is provided bya polyamide braid and soft ethylene propylene diene monomer (EPDM) endcaps. Built-in Pt100 sensors provide optimum temperature control The evenly wrapped resistance heating cable allows an homogeneous heat distribution throughout the hose.

The standard versions can be used for a wide range of applications. Special designs are available on request. 

These Isopad base drum heaters are used to provide medium flow and process temperature in hazardous environments. ISOPAD FIBDR Base heater is a solid alminium plate that carries the heating cable and evenly distributes the temperature to the drum.

FIDR-LID Insulated Lid for FIDR Drum Heater Blue

Isopad IDR-G soft jacket drum heaters

 are designed to wrap around a drum and heat the contents. They are insulated to maximize heat efficiency.

IDR-SMA Silicone drum heating band Isopad

These silicone heating bands are a simple way to heat drums and gas bottles. 

We offer silicone drum heaters in different sizes and with different options. Please contact us for further details.