Heating jackets Isopad
In our jacket heaters there are three components:
a heater, the insulation for that heater, and the carrier for that assembly. The outer carriers on these versions may be washable. Different shapes are manufactured to customer requirements and many attachment and fixing methods are available. A small number of jacket versions are available with hazardous area approval.
Code: IJ-S_IJ-G-IJ-Q
%%WISHLIST_DETAILS_BOX%% |
Area Specifications |
IJ-S |
IJ-G |
IJ-Q |
Area classification |
Nonhazardous, ordinary area |
Nonhazardous, ordinary area |
Nonhazardous, ordinary area |
Ingress protection |
IP65 |
IP20 |
IP20 |
Electrical protection class |
Class II; Class I with metal sheath |
See note |
See note |
Maximum withstand temperature (power off) |
200°C |
450°C |
900°C |
Note: These are components for further installation. The protective arrangements of Protection Class I or Class II must be followed during installation of the components and are the responsibility of the assembly company. Please refer to the manual for further information. |
|||
|
|||
Heater Constructions |
|||
Sensor Type |
PT100, Fe-CuNi/J or NiCr- Ni/K acc. to DIN |
PT100, Fe-CuNi/J or NiCr- Ni/K acc. to DIN |
NiCr-Ni Type K |
|
|
|
|
Technical Data |
|
|
|
Frequency |
50-60 Hz |
50-60 Hz |
50-60 Hz |
Maximum operating voltage |
400 Vac |
240 Vac |
240 Vac |
Maximum area load |
0.7 W/cm² |
1.5 W/cm² |
3.6 W/cm² |
|
File | Info |
---|---|
ISOPAD_IJ-S_IJ-G-IJ-Q_Heating_Jackets_Datasheet | [PDF, 368.97 KB] |