IHH-ST1A/ST1D Heated hose, standard range for liquid and gaseous media Isopad
Heated hose, standard range for liquid and gaseous media IHH-ST1A/ST1D
Isopad IHH-ST1A/ST1D is a flexible heated hose for liquid and gaseous media with a maximum operating temperature of 100°C. The standard versions have smooth PTFE inner hose constructions with stainless steel braiding for pressurized operation. Provided with thermal insulation consists of polyester fleece and ethylene propylene diene monomer, Mechanical protection is provided by a polyamide braid and soft EPDM endcaps. Built-in Pt100 sensors provide optimum temperature control,evenly wrapped resistance heating cable allows an homogeneous heat distribution throughout the hose.
Code: ST1A
%%WISHLIST_DETAILS_BOX%% |
Area Classification | Non Hazardous / Safe Area |
---|---|
IP Rating | IP54 |
Electrical Protection Class | Class I |
Maximum Withstand Temperature | 100ºC (Power Off) |
Ambient Temperature Range | -20ºC to +40ºC |
Standard Length | Up to 19m |
Nominal Width | 4mm, 6mm, 8mm, 10mm or 13mm |
Heater Type | Resistance Heating Cable |
Material | PTFE |
Outer Sheath Material | Copper-nickel Braid |
Carrier | Stainless Steel Braid |
Inner Hose | Smooth PTFE Hose |
Fittings Material | Galvanized Steel |
Thermal Fabric Fibre Insulation | Polyester Fleece of 4mm to 5mm Thickness |
Thermal Foam Insulation | EPDM of 9mm to 11mm Thickness |
Outer Protection | Polyamide Braid |
Lead & Sensor Connection Length | 1.5m |
Lead & Sensor Cross Section | Depending on Design |
Lead & Sensor Maximum Operation Temperature | 180ºC |
Lead & Sensor Insulation Material | Silicone |
Sensor Type | PT100 (2 Wire DIN Class B) |
Nominal Operating Voltage | 120V or 230V AC |
Nominal Diameter | Power (w/m) | Maximum Static Pressure (Bars) |
Minimum Bend Radius |
|||
---|---|---|---|---|---|---|
Code | mm | at 100ºC | at 20ºC |
at 100ºC |
Static | Dynamic |
1 | 4mm | 70 w/m | 250 | 238 | 100mm | 200mm |
2 | 6mm | 80 w/m | 240 | 228 | 150mm | 300mm |
3 | 8mm | 90 w/m | 200 | 190 | 200mm | 400mm |
4 | 10mm | 100 w/m | 175 | 166 | 140mm | 480mm |
5 | 13mm | 110 w/m | 150 | 143 | 270mm | 540 |
Dynamic performance represents two dimensional single piston stroke per second (1 Hz) with compressed air (medium) 6 bars at 100ºC operating and 20ºC ambient temperature.
Dynamic performance of heated hoses is recommended to be tested for each individual application. |
Non-standard heated hoses can be provided on request if required. Heated hoses can be provided with the following variations:
- Other nominal sizes and inner hoses
- Sizes up to 120m
- Other sensor types, e.g thermocouples Type K, Type J, etc
- Supply voltage up to 400V, single phase or three phase
- Higher power outputs
- Higher IP rating, e.g IP65 for outdoor applications
- Increase pressure resistance, up to 475 bar at 100ºC (depending on nominal diameter)
- ATEX & IECEx Hazardous Area approved components
- Replaceable inner hoses for non-pressurised gas analysis
- Premounted plugs and special supply and messenger leads
- Controlling devices and high temperature lock-out thermostats
File | Info |
---|---|
Isopad-Datasheet-Heated-Hose-H58617-IHHST1A-ST1D-IHH100 | [PDF, 131.29 KB] |