الفلاتر

كبلات تسخين ELEKTRA مثبت مرن صغير

كبلات تسخين ELEKTRA مثبت مرن صغير

مصنوع من النحاس

الماركة:ELEKTRA أنظمة تدفئة أرضية كهربائية صناعية و منزلية

الكود: MI00715

طلب المنتج	قم بتقييم هذا المنتج
%%WISHLIST_DETAILS_BOX%%	مقارنة

Heating cables frost protection cable accessories ELEKTRA 30

Protection of roofs, gutters
and downpipes

Snow and ice protection systems
protect against:

• snow and ice build-up on roofs,
• damage caused by ice build-up in gutters
and downpipes,
• unsightly water damage on building walls,
• icicle formation

For protecting roofs and their elements,

heating cables with UV-resistant outer

sheath need to be applied:

• ELEKTRA VCDR heating cables,
• ELEKTRA TuffTec heating cables,
• ELEKTRA SelfTec and SelfTec PRO20
self-regulating heating cables.

Heating cables frost protection cable accessories ELEKTRA 32

ELEKTRA VCDR heating cables

are characterized by constant
power output value of 20 W/m, the output value for the
TuffTec™ is 30 W/m. They are offered for sale in ready-made
units terminated with a power supply conductor (the so called
“cold tail”). When designing your heating system,
account for the available cable lengths.
Thanks to their exceptionally high resistance against damaging
influence of any bituminous substances, ELEKTRA TuffTec™
heating cables are ideally suited for the purposes of heating
roofs covered with roof felt or bituminous shingles.

ELEKTRA SelfTec self-regulating heating cables
ELEKTRA SelfTec available as
ready-to-install units

will adjust their heat output according to ambient
temperatures:
•
terminated with a power supply
conductor with a sealed plug,
for DIY installation on short segments

Heating cables frost protection cable accessories ELEKTRA 34

			Heating cables need to be fixed to the roof surface with copper or titanium zinc alloyplated holders. – on metal sheet-covered roofs the holders can be: • glued to the roof surface, • fastened through means of rivets (with the fastening insulated with silicone), • suspended on insulated structural wires.
	– on tiles-covered roofs the holders can be: • fastened to the battens, • fastened to the battens and structural wires.
			Holders made of titanium zinc or copper
	– on roof felt-, tiled- or bituminous shingles-covered roofs the holders should be fastened to the roof by securing strips of thermal weldable roofing membrane across the holders.

Heating cables frost protection cable accessories ELEKTRA 44

▲ Back to the top

الملف	المعلومات
	[PDF, 2.12 MB]
	[PDF, 2.88 MB]
	[PDF, 2.86 MB]
	[PDF, 322.66 KB]

انظمة تسخين