Frost Heave Prevention

The DigiTrace HTC-915 system

 

is a compact, full-featured microprocessor-based single point heat-trace controller.

• HTC-915-CONT: Heat-Trace Control System
• HTC-915-LIM: Temperature Limiter

Single-Circuit Electronic Controller with Dual Display

Panel-mounted controller, non-hazardous areas, can be used with any Pt100 temperature sensors or any type of standard thermocouple, -200 to +2000°C.

The DigiTrace NGC-20

is a field-mounted electronic temperature control system providing local control and central monitoring capabilities for industrial heat-tracing applications.

AT-TS-14 is an electronic line sensing thermostat for self-regulating heating cables for temperature maintenance on pipelines for fatty waste water.

Mechanical surface sensing thermostat  RAYSTAT-E

 

The Raystat-EX-03 is a hazardous area electronic surface sensing thermostatproviding accurate temperature control for heating cables.

 

Raystat-EX-04 Ambient sensing electronic thermostat

The DigiTrace MONI-PT100-NH sensor is designed for ordinary areas. It will be delivered with a glass fiber reinforced polycarbonate junction box with cage clamp terminals.

The DigiTrace MONI-PT100-EXE-SENSOR is a hazardous area approved sensor.

The DigiTrace MONI-PT100-EXE-SENSOR is a three-wire platinum RTDs (resistance temperature detectors) typically used with control and monitoring systems when accurate temperature control is required. The sensor has an M16 cable gland preinstalled on the sensor lead including brass, sealing washer, locknut and earth tag.

Temperature sensor without junction box for hazardous area (Zone 1, zone 2 or safe area)

The DigiTrace MONI-PT100-EXE-SENSOR is a hazardous area approved sensor.

The DigiTrace MONI-PT100-EXE-SENSOR is a three-wire platinum RTDs (resistance temperature detectors) typically used with control and monitoring systems when accurate temperature control is required. The sensor has an M16 cable gland preinstalled on the sensor lead including brass, sealing washer, locknut and earth tag.

MONI-PT100-260/2 temperature sensor is designed for providing accurate temperature measurements.

Temperature sensor with transmitter 4/20 mA 3 Wire PT100 sensor with 4 to 20 mA transmitter for hazardous area (Zone 1)

The MoniTrace 200N-E

 

is a multi-circuit control and monitoring system for heat-tracing used in process temperature maintenance and frost protection applications. It controls up to 130 heat-trace circuits in either surface sensing, ambient sensing or PASC. 

Compact, temperature limiter that provides protection against over-temperature, two versions: base unit for use with the HTC-915-CONT or version with preprogrammed lock out temperature, available with or without pre-fixed temperature settings for T1, T2, T3, T4 and T5 classified areas.

Compact, digital thermostat for ON/OFF temperature control to be mounted in a non-hazardous area

Surface sensing electronic thermostat 

E-50 Heat-shrink under insulation end seal kits. These end seal kits are designed for the termination of Raychem's industrial heating cables.